Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
F-47
[1]
[4]
[2]
[3]
[5] [6][2]
6. Remove the harness from the harness guide [1].
7. Remove the two screws [2], and remove the earth plate [3].
8. Disconnect the connector [4], and remove the IDC sensor [5].
NOTE
▪ Be careful not to break the sensor head [6] of the IDC sensor.
9. To reinstall, reverse the order of removal.
4.7.2Temperature/humidity sensor (TEM/HUMS1)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Open the right door.
3. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
4. Remove the paper feed unit.
F.4.2.6 Paper feed unit
[1][2]
[3]
5. Remove the screw [1].
6. Disconnect the connector [2], and remove the temperature/humidity sensor [3].
7. To reinstall, reverse the order of removal.
4.7.3Exit path switch solenoid (SD1)
1. Remove the fusing unit.
E.3.1.12 Replacing the fusing unit
2. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
3. Remove the rear cover.
F.4.1.3 Rear cover
4. Remove the left cover.
F.4.1.2 Left cover
5. Remove the PWB box.
F.4.2.7 PWB box
6. Remove the fusing drive unit.
F.4.2.8 Fusing drive unit
[1]
7. Remove the Lever [1].
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English