Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
F DISASSEMBLY/REASSEMBLY > 6. PF-P20/PF-P21
F-55
[2][3][1][2]
[1] [1][2] [2]
3. Disconnect five connectors [1] from the PC control board.
4. Remove four screws [2], and remove the PC control board [3].
5. To reinstall, reverse the order of removal.
6.7Drive motor (M1) (PF-P20/PF-P21)
1. Remove the rear cover.
F.6.1 Rear cover (PF-P20)
F.6.2 Rear cover (PF-P21)
[2] [1]
[2] [3]
2. Disconnect the connector [1].
3. Remove four screws [2] and remove the drive motor [3].
NOTE
▪ When removing or installing the motor, do not hold the rotor but hold
the plate of the motor or the board.
4. To reinstall, reverse the order of removal.
6.8Drive assy (PF-P20/PF-P21)
1. Remove the rear cover.
F.6.1 Rear cover (PF-P20)
F.6.2 Rear cover (PF-P21)
2. Remove the drive motor.
F.6.7 Drive motor (M1) (PF-P20/PF-P21)
[2][3]
[1]
3. Disconnect two connectors [1], and remove the harness from two wire saddles
[2] and the edge cover [3].
[1]
[1]
[2]
4. Remove three screws [1], and remove the drive assy [2].
5. To reinstall, reverse the order of removal.
6.9Lift-up motor (M2) (PF-P20/PF-P21)
1. Remove the rear cover.
F.6.1 Rear cover (PF-P20)
F.6.2 Rear cover (PF-P21)
2. Remove the drive motor.
F.6.7 Drive motor (M1) (PF-P20/PF-P21)
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English