Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
H UTILITY MODE > 12. Supplementary explanation of utility mode
H-40
• To use the FeliCa card with NFC, select [FeliCa+NFC(HCE)], [SSFC+NFC(HCE)], [FCF
+NFC(HCE)], [FCF(Campus)+NFC(HCE)], or [FeliCa(Proprietary Card)+NFC(HCE)]. When [SSFC
+NFC(HCE)] is selected, detailed information such as the company code or company identification
code is registered.
Card Detail Settings The settings information of for the registered IC card loadable driver can be
changed via the Web browser on the machine. This does not display if any of the
following conditions are satisfied.
• A driver other than the AU-201S loadable driver is installed.
IC Card Type The type of the IC card which has been set will be displayed.
• This is displayed when the loadable driver used for the YSoft card reader has been installed.
Operation Settings Set how to log in to this machine.
• “Card Authentication”: Pass the IC card or NFC-compatible Android device over the authentication
unit to log in.
• “Card Authentication + Password”: Pass the IC card or NFC-compatible Android device over the
authentication unit, and enter the password to log in.
• “Card Authentication” is specified by default.
Authentication Card
ID Number
• Specify whether to notify the counter, which collects the use status of this machine, of the
authentication card ID.
• “Ignore” is specified by default.
Bio
Authentication
Beep Sound • Set whether to give a "blip" sound when the finger vein pattern is scanned successfully.
• “ON” is specified by default.
Operation Settings Set how to log in to this machine.
• “1-to-many authentication”: A user simply needs to place his or her finger to log in.
• “1-to-1 authentication”: A user needs to enter the user name and place his or her finger to log in.
• “1-to-many authentication” is specified by default.
• *: Vendor ID and Product ID are identification information to specify USB devices.
<Procedure>
• Select either one of the authentication devices and press the corresponding key to go to the individual operation setting screen.
• The screen displays the authentication device that is selected in [Service Mode] -> [Billing Setting] -> [Authentication Device 2].
• When using SSFC (Shared Security Formats Cooperation) for IC card authentication, acquire the following information from the
administrator and convert the value to input using the control panel.
Information to be obtained from the administrator
Items Sample-data (decimal number) Setting value (hexadecimal number)
Room number 37 00 25
Floor number 15 00 0F
Building number 50 00 32
Area number 85 00 55
Security level 2 00 02
Company identification code
(CL code) (*1)
06BGLQVX17
(ASCII code)
30 36 42 47 4C 51 56 58 31 37
Company code (*2) CompanyA
(ASCII code)
CompanyA
*1: The character length of the company code is 10 bytes.
*2: Use alphabetical upper case/lower case characters and numeric characters for Company code. When the company code is not set, this
space will be left blank.
Logoff Settings
• Select whether or not the user is logged off after a scan or fax is sent or after the copy document is scanned.
Setting item Default setting
Do not log off
○
Log off
12.5Network
12.5.1Network Fax Setting
• It will not be displayed on the screen when all items are set to “OFF” in [Service Mode] -> [System 2] -> [Network Fax Settings].
SMTP TX Setting
• To set SMTP TX when network fax function is being used.
• To set SMTP TX port number and connecting time out period when network fax function is being used.
Setting item Contents Setting value Default
setting
Port No. To set SMTP TX port number. 1 to 65535 25
Connection Timeout To set the connection timeout time. 30 to 300 sec. 60 sec.
<Procedure>
1. Touch [Input].
2. Enter the setting value using the 10-key pad, and touch [OK].
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English