d-Color MF4003/MF3303
L TROUBLESHOOTING > 9. FAX TROUBLE CODE
L-112
Error
code
Catego
ry
Contents of error How to correct Installation position
(Service Mode -> [FAX] -> [Line #])
3. Contact the fax machine, and ask it to send again with
the correct box number.
-
R97 Received an PC-FAX
RX indication, but the
password mismatched
1. Check the communication password for PC-FAX RX
settings.
-
2. Inform the fax machine of the correct password, and ask
it to send again.
-
R99 Others The machine has issued
a reception instruction
command before a
reception notification is
sent from the fax board
to the machine.
1. Set the Receive Signal Detection Mode to No. of Times. [Network] -> [Network Setting 1] ->
[Receive Signal Detection Mode]
2. Distribute and reduce other options of the MFP. -
9.32Other
Error code Category Contents of error How to correct
- Others When the main body recovers from the
sleep mode while receiving a fax, the ring
tone is generated more than the set
number of times. (2 to 3 times)
This error is avoidable with any one of the following settings.
• Set [Administrator] -> [Maintenance] -> [Timer Setting] ->
[Power Settings] -> [Power Consumption in Sleep Mode] to
“Disabled”.
• Set [Administrator] -> [Fax Settings] -> [Line Parameter Setting]
-> [Number of RX Call Rings] to “0 x”.
To Next Page
Loading...
Need help?
General