Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
I SERVICE MODE > 8. CS Remote
I-24
• To notify the Center, select the notification item to the Center.
Setting item Contents
No Notification Select it to disable the report to the center.
[1] Sales count data
[2] Error count data
[3] Service count data
[4] Life count data, Life cycle data
[5] CSRC-System data, Device config data
[6] History data
[7] EKC data
[8] Adjustment data
[9] Coverage data
[10] Not used
[11] Not used
[12] Not used
NOTE
▪ Multiple items of data can be selected and sent at one time. However, be sure that only EKC data cannot be sent together
with other items of data.
8.1.8Server Setting
(1)E-Mail1 or E-mail2 is selected
Server for RX
Setting item Contents Setting value Default setting
POP3 Server To set the POP3 server address used for the CS Remote Care.
It can be set by the IP address or the domain name.
• Input IP Address: Input in version 4 format.
• FQDN input: Enter the domain name.
Input IP Address
[0 to 255].[0 to 255].
[0 to 255].[0 to 255]
-
FQDN input
Alphanumeric
characters and
symbols (up to 63
characters)
-
POP3 Login Name To set the login name for the POP3 server used for the CS Remote Care. Alphanumeric
characters and
symbols (up to 64
characters)
-
POP3 password To set the logon password for the POP3 server used for the CS Remote Care. Alphanumeric
characters and
symbols (up to 15
characters)
-
POP3 Port Number To set the POP3 port number used for the CS Remote Care. 1 to 65535 110
Receive
Setting item Contents Setting value Default setting
E-Mail Address To set the e-mail address used for the CS Remote Care. Alphanumeric
characters and
symbols (up to 129
characters)
-
Mail Check To set whether or not to use mail check and the time interval for the POP server
used for the CS Remote Care.
No
○
1 to 120 min
Connection Time-out To set the timeout period for connection during reception. 30 to 300 Sec 60 Sec
APOP Authentication To set whether or not to authenticate the APOP during reception. Yes
No
○
Send
Setting item Contents Setting value Default setting
SMTP Server To set the SMTP sever address for transmission used for the CS Remote Care.
It can be set by the IP address or the domain name.
• Input IP Address: Input in version 4 format.
• FQDN input: Enter the domain name.
Input IP Address
[0 to 255].[0 to 255].
[0 to 255].[0 to 255]
-
FQDN input
Alphanumeric
characters and
symbols (up to 63
characters)
-
SMTP port Number To set the SMTP port number for transmission used for the CS Remote Care. 1 to 65535 25
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English