Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
L TROUBLESHOOTING > 3. TROUBLE CODE
L-71
Trouble detection condition The file or data that is necessary to start the virus scan has been lost.
Trouble isolation -
Relevant electrical parts Storage board (STRGB)
Procedure
1. Reboot the machine. (MFP will reboot maximum 2 times by itself.)
2. Replace STRGB.
3.19.5CE101
Contents
Trouble type CE101: Browser finish detected
Rank C
Trouble detection condition • The browser is automatically recovered (restarted) after the main body detected that the browser (separate
process) has stopped with fault.
• When the “Malfunction finish is detected over predetermined number of times” or “the browser task process is
except in idle (printing, etc.)”.
Trouble isolation -
Relevant electrical parts • CPU board (CPUB)
• Base board (BASEB)
Procedure
1. Check the connectors on BASEB for proper connection and correct as necessary.
2. Replace CPUB.
3. Replace BASEB.
3.19.6CE201
Contents
Trouble type CE201: Transmission operation log storage fault
Rank C
Trouble detection condition When the transmission log storage failed, it repeats retrial until transmission operation log is stored. The trouble is
detected when the retrial failed for predetermined number of times.
Trouble isolation -
Relevant electrical parts • CPU board (CPUB)
• Base board (BASEB)
Procedure
1. Check the connectors on BASEB for proper connection and correct as necessary.
2. Replace CPUB.
3. Replace BASEB.
3.19.7CE202
Contents
Trouble type CE202: PDL interpreter error
Rank C
Trouble detection condition An error inside the CPU board (CPUB) is detected during converting the PDL information.
Trouble isolation -
Relevant electrical parts • CPU board (CPUB)
• Base board (BASEB)
Procedure
1. Turn OFF the main power switch and unplug the power cord. Connect the power cord after 15 sec. or more, and turn ON the main power
switch.
2. Select [Service Mode] -> [State Confirmation] -> [Memory/Storage Adjustment] -> [Format] -> [Logical Format] and perform the function.
3. Select [System 1] -> [Initialization] -> [Clear All Data] and perform the function.
4. Replace CPUB.
5. Replace BASEB.
3.19.8CE203
Contents
Trouble type CE203: Unrecoverable error
Rank C
Trouble detection condition An error does not recover even after an auto recovery.
Trouble isolation -
Relevant electrical parts • CPU board (CPUB)
• Base board (BASEB)
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English