Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
H UTILITY MODE > 6. Administrator
H-25
Key name Function/Precondition
Destination Check Display
Function
-
Number Display Function
(Only for Japan)
It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] ->
[Number display] is set to “ON.”
Confirm Address (TX) -
Confirm Address (Register) -
PIN Code Display Mask
Function
-
Reset the setting value after
using other functions
-
Require the use of the use of
the External Line key for
outside calling
-
Prohibit fax usage while
using ext TEL line
-
Dial-In Settings (Only for
Japan)
It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Dial In] is set to “ON.”
Closed Network RX It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Closed area RX] is set to
“ON.”
Remote RX Settings (Only
for Japan)
It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Remote Rx] is set to “ON.”
Incomplete TX Hold • It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Re-Transmission] is set
to “ON.”
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] shows that
“Key Counter Only” or “Vendor 2” is mounted.
RX Data Operation
Settings
Memory RX Setting It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] ->
[Compulsory Memory RX] is set to “ON.”
Forward TX Setting • It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the “Vendor 2” is mounted.
• It will not be displayed when [Service Mode] -> [Billing Setting] shows that
[Authentication Device2] is mounted.
• A forwarding address except a case of the fax, specify [File Type] a fax can be
converted into a file. The file types able to be specified are PDF, XPS, and
TIFF. However, when a received job is an Internet Fax or IP Address Fax, you
can specify other file types by changing the switch No.124 to [00000001] at Bit
assignment/[01] at HEX assignment in [Service Mode] -> [System 2] ->
[Software Switch Setting].
PC-Fax RX Setting [Dail-In only] will be displayed when [Administrator] -> [Fax Settings] -> [Function
Setting] -> [Dial-In Settings] is set to “ON.”
TSI User Box Settings -
None -
PC-Fax TX Setting -
RX Data Deletion
Restriction Settings
Password Deletion • This setting is not available without user authentication.
• This setting is not available without the account track.
• This function cannot be set if the User Box Administrator has not been set.
Administrator User Box
Deletion
PBX Connection Setting -
6.10.5Report Settings
Key name Function/Precondition
TX Result Report -
Tx Result Report Print
Confirmation Screen
-
Sequential TX Report -
Broadcast Result Report -
Bulletin TX Report -
Relay TX Result Report It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Relay] is set to “ON.”
TX Result Report Print Settings Print • This function can be set if “E-mail address” has been set in [Administrator] ->
[System Settings] -> [Machine Setting].
• This function can be set if “ON” is set for [E-mail TX (SMTP)] and “ON” is set for
[E-Mail Send] in [Administrator] -> [Network] -> [E-mail Setting].
E-mail Notification
Activity Report It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] shows
that the “Vendor 2” is mounted.
Relay Request Report It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Relay] is set to “ON.”
PC-Fax TX Error Report -
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English