d-Color MF4003/MF3303
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
SETTING
J-8
14. Select [Service Mode] -> [Billing Setting] -> [License Management].
15. Select [Activation] -> [Function Code] or [License Code], and enter the function code and the license code confirmed at Step13.
<When activating with an USB memory>
Connect the USB memory to the USB port on the side of the control panel, and select [Activation] -> [USB].
16. Touch [Apply].
17. Follow the massage appearing on the screen and turn OFF and ON the main power switch.
<When activating with an USB memory>
This step is unnecessary. Proceed to the next step.
18. Select [Service Mode] -> [Billing Setting] -> [License Management] -> [Function List], and confirm that the activated function is displayed at
the list.
1.6.2Deactivation
• To deactivate i-Option functions.
• To deactivate i-Option functions due to registration error, expiration of lease term, change to other MFP or etc.
• The functions can be deactivated by selecting the desired function and enter the appropriate deactivation code.
NOTE
â–ª You need to access License Management System (LMS) to implement each function setting.
â–ª Before accessing the LMS, CE are required to register the E-mail address and the password in the LMS. To register, click [CE
Initial Registration] that is located in the upper right of CE Login screen.
<Procedure>
1. Check the serial number of the target MFP.
To Next Page
Loading...
Need help?
General