Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
I SERVICE MODE > 10. System 2
I-51
7. Using the “binary” command, set the File transfer mode to the binary transfer.
8. Using the “get” command, transfer the data for capture to PC.
9. Finish the command prompt.
NOTE
▪ After receiving capture data, select [Administrator] -> [Security] -> [Security Details] -> [Print Data Capture], and select [Restrict]
for the print data capture setting in order to delete the job data stored in the MFP storage.
▪ When Storage Format or Overwrite Temporary Data is performed, job data is deleted.
10.8Network Fax Settings
• To set whether or not to use network fax function.
• To set when using network fax function.
• Selection will be available when each network fax function is set to "ON" in [Administrator] -> [Network] -> [Network Fax Setting] ->
[Network Fax Setting].
Setting item Setting value Default setting
IP Address Fax ON
OFF
○
Internet Fax ON
OFF
○
10.9RX File Change Page Name
• To set whether to change the document file name to forward TX or take out a file from the Memory RX Box.
Setting value Default setting
Change
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English