Olivetti d-Color MF4003 User Manual

P THEORY OF OPERATION > 1. d-Color MF4003/MF3303
P-64
d-Color MF4003/MF3303
1.17.2Power key
[1]
[1] Power key - -
(1)Power key functions
• The power key offers two functions, serving as the power save button and the sub-power switch found in conventional models,
depending on how long it is held down.
• In the default setting, holding down the power key for a short time sets the machine into the power save mode (low power mode) and
holding it down for a long time sets the machine into the sub power OFF mode.
• The mode can be changed from the following: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings].
How long the power key is
held down
Default setting Settings changed by Administrator Settings
Short time Low power mode (*2) Sleep mode (*2)
Sub power OFF mode (*1)
Long time Sub power OFF mode ErP auto power off mode (*1)
• *1: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power Key Setting]
• *2: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power Save Settings]
(2)Status in each mode
[1]
[2]
[3]
[1] Power key LED [2] Power key
[3] Control panel []
Mode State Power key LED
Standby All functions are ready to accept and ready to perform jobs. Lit up blue
Power save
mode
Low power
mode
• Power consumption is limited to a level lower than the standby state with
the fusing temperature control minimized.
• Reset when a job is received or the machine is operated.
Blinking in blue
Sleep mode
(*2)
(Not reduce)
• Power consumption is reduced in low power mode.
• Sensors that are used internally are operating.
Blinking in blue
Sleep mode
(*2)
• Power is supplied only to a portion of the base board required for
receiving a job.
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English