I SERVICE MODE > 17. Network Settings
I-124
d-Color MF4003/MF3303
Existence Notice Interval
• To set the time interval used to send existence notice packets for existence notice from the MFP to the XMPP server.
Setting range Default setting
1 to 3600 sec. 55 sec.
Learning Function
• To set whether to enable “Learning function” used to change the packet transmission interval in accordance with the XMPP session state
when sending existence notice.
Setting item Description Setting Default setting
Learning Function To set whether to enable the learning function.
• When [Enable] is set, the adjust value and lower limit must be
configured.
Enable
Disable
○
Adjust Value To lengthen the next packet transmission interval by the amount of the
"adjust value" when a existence notice is sent successfully.
To shorten the next packet transmission interval by the amount of the "adjust
value" when a existence notice is sent unsuccessfully.
1 to 3600 sec. 30 sec.
Lower Limit To make sure not to set the packet transmission interval shorter than the
"lower limit".
1 to 3600 sec. 30 sec.
17.3Port Settings
• To set the threshold value for determining the load state of the Raw port.
Setting range Default setting
1 to 60 minutes 3 minutes
17.4MTU Param. set.
• Set the maximum value (MTU) of data that can be transmitted at once.
• Set operations of Path MTU Discovery.
NOTICE
• Path MTU Discovery detects the minimum MTU on the communication path and uses it to automatically set the MTU size.
Path MTU Discovery Settings
• Set whether to enable Path MTU Discovery.
Setting Description Default setting
0 To enable Path MTU Discovery.
○
1 To disable Path MTU Discovery.
Minimum MTU Size Setting
• This setting is available when Path MTU Discovery is enabled.
Setting range Description Default setting
68 byte to 1500 byte The setting value is used as the minimum MTU size of the packet to be sent. 552 byte
Fixed MTU Size Setting
• This setting is available when Path MTU Discovery is disabled.
Setting range Description Default setting
1280 byte to 1500 byte The setting value is used as the fixed MTU size of the packet to be sent. 1500 byte