d-Color MF4003/MF3303
H UTILITY MODE > 6. Administrator
H-23
Key name Function/Precondition
Fax • It will be displayed when fax kit is mounted.
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to
“Vendor 2.”
PCL Setting Brightness -
Contrast -
Saturation -
Color Balance -
PS Setting Brightness -
Contrast -
Saturation -
Color Balance -
Security Setting Print XPS/OOXML Errors -
Interface Setting Network Timeout -
USB Timeout -
Assign Account to
Acquire Device Info
-
6.9Store Address
Key name Function/Precondition
Address Book E-mail Address -
FTP -
SMB -
WebDAV -
User Box It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the “Vendor 2” is
mounted. (It will be displayed when the key counter is mounted.)
Fax -
IP Address Fax Setting will be available when [IP Address Fax Function Settings]
in [Administrator] -> [Network] -> [Network Fax Setting] is set to
“ON.”
Internet Fax Setting will be available when [I-Fax Function Setting] in
[Administrator] -> [Network Settings] -> [Network Fax Setting] is
enabled.
Group Destination Information -
Limiting Access to Destinations -
Subject It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
“Management Device 2.”
Text
Call Rejection Setting (Only
for Japan)
Setting will be available when [Reject Calls] and [Number display] in [Service Mode] -> [FAX] -> [System] is set to
“ON.”
It will be displayed when [Number Display Function] in [Administrator] -> [Fax Settings] -> [Function Setting] ->
[Function ON/OFF Setting] is enabled.
Prefix/Suffix -
Prefix/Suffix Setting -
6.10Fax Settings
NOTE
▪ It will be displayed when fax kit is mounted.
6.10.1Header/Footer Position
Key name Function/Precondition
Header Position “OFF” cannot be used on the USA and Hong Kong models.
TTI Print Position and Character
Size
-
Print Receiver’s Name This setting is not available on the USA and Hong Kong models.
Footer Position -
6.10.2Line Parameter Setting
Key name Function/Precondition
Dialing Method -