Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
H UTILITY MODE > 6. Administrator
H-24
Key name Function/Precondition
Receive Mode It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] shows that
“Management Device 2” is mounted.
Number of RX Call Rings
(Receive Time Interval Setting)
When [Service Mode] -> [FAX] -> [Network] -> [Network Setting 1] -> [Receive Signal Detection Mode] is set
to “Time”, [Receive Time Interval Setting] will be displayed.
Number of Redials It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] shows that
the “Vendor 2” is mounted.
Redial Interval
Manual RX V34 Setting -
TEL/FAX Auto Switch (Only for
Japan)
-
External Phone Call Monitor
Sound (Only for Japan)
It will be displayed when [Administrator] -> [Fax Settings] -> [Line Parameter Setting] -> [TEL/FAX Auto
Switch] is set to “ON.”
External Phone Call Time (Only
for Japan)
Audio Recognition Setting (Only
for Japan)
External Phone Disconnection
(Only for Japan)
-
Answering Machine Connection
Settings (Only for Japan)
-
Line Monitor Sound -
Line Monitor Sound Volume
(Send)
-
Line Monitor Sound Volume
(Receive)
-
Pause Time -
Ring Detection Pattern This setting is available only on the New Zealand model.
6.10.3TX/RX Settings
Key name Function/Precondition
Duplex Print (RX) It will not be displayed when [Administrator] -> [Fax Settings] -> [TX/RX Settings] -> [Print Separate Fax Pages] is
set to “ON.”
Letter/Ledger over A4/A3 -
Print Paper Selection -
Print Paper Size To make the setting of Print Paper Size enable, set [Administrator] -> [Fax Settings] -> [TX/RX Settings] -> [Paper
Tray Setting] to “Auto.”
Incorrect User Box No.
Entry
-
RX from Rejected Fax No.
(Only for Japan)
• It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] -> [Reject Calls] is set to
“ON.”
• [Administrator] -> [Fax Settings] -> [Function Setting] -> [Function ON/OFF Setting] -> [Number Display
Function] is set to “ON.”
Paper Tray Setting -
Allow Paper Tray Setting -
Min. Reduction for RX
Print
-
Print Separate Fax Pages It will not be displayed when [Administrator] -> [Fax Settings] -> [TX/RX Settings] -> [Duplex Print (RX)] is set to
“ON.”
File After Polling TX -
No. of Sets (RX) -
Individual Receiving Line
Setup
It will be displayed only when multiple lines are used and [Administrator] -> [Fax Settings] -> [Multi Line Settings] ->
[Fax Line 2 to 4] -> [Multi Line Settings] -> [Line 2 to 4 Setting] is set to “TX and RX” or “RX Only”.
Individual Sender Line
Setup
It will be displayed only when multiple lines are used and [Administrator] -> [Fax Settings] -> [Multi Line Settings] ->
[Fax Line 2 to 4] -> [Multi Line Settings] -> [Line 2 to 4 Setting] is set to “TX and RX” or “RX Only”.
TX-Line Auto Switch
Setting
-
Fax Rx Print Setting -
6.10.4Function Setting
Key name Function/Precondition
Function ON/OFF Setting F-Code TX -
Relay RX It will be displayed when [Service Mode] -> [FAX] -> [System] -> [Display Setting] ->
[Relay] is set to “ON.”
Relay Printing
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English