Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
SETTING
J-16
14. After repair is completed, the machine restarts automatically.
1.6.4Initialize
• To initialize license management information.
• To be used when license management information cannot be repaired.
• License management information should be initialized when the machine fails to generate request code or repair request code due to any
trouble and the information cannot be repaired.
NOTE
▪ You need to access License Management System (LMS) to implement each function setting.
▪ When license management information cannot be repaired, initialize the information with the following procedure.
<Procedure>
1. Contact the license management section of sales company to report the information necessary to issue the initialize code.
2. The license management section of sales company supplies the initialize code.
3. Call the Billing Setting to the screen.
4. Touch [License Management] -> [Initialize].
5. Enter the initialize code issued by call center using the keyboard on the screen, and touch [Apply].
6. After completing the initialization, follow the message appearing on the screen and turn OFF and ON the main power switch.
1.6.5Request Code
• To display and print request code and serial number.
• To check the request code and serial number.
NOTE
▪ When the license management error is occurred, it will not be displayed until the repair code is input.
<Procedure>
1. Set A4S or 8 1/2 x 11S paper to the tray.
2. Press start key at request code screen to print.
1.6.6List
• To display and print deactivation complete code and serial number.
• To check deactivation complete code and serial number.
<Procedure>
1. Set A4S or 8 1/2 x 11S paper to the tray.
2. Press start key at deactivation complete code screen to print.
1.6.7Function List
• To display currently activated functions.
• To display activated functions.
1.7Manage OpenAPI Authentication
Restriction Code
• These are communication settings for the application which is developed by the third vendor. Do not set or change these settings without
vendor’s instructions.
Region Code
• These are communication settings for the application which is developed by the third vendor. Do not set or change these settings without
vendor’s instructions.
1.8WebDAV Server Setting
Select Address
• To select the address of the LMS server used to manage the license of i-Option.
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English