Olivetti d-Color MF4003 User Manual

I SERVICE MODE > 10. System 2
I-49
d-Color MF4003/MF3303
10.5.22SW No.188
• Operation setting for print status LED
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000001 00 Blinking 00000001 / 01
00000010 02 Unlit
10.5.23SW No.203
• Setting to automatically change log-in authorization to a second user when the second user attempts card authentication after a first user
has been authenticated through card authentication.
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Log-in not authorized. 00000000 / 00
00000100 04 Log-in authorized.
10.5.24SW No.206
• Setting whether to enable Coverage Counter
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Disable 00000000 / 00
00000001 01 Enable
Reference
• [Service Mode] -> [Billing Setting] -> [Coverage Rate Clear], [Print Counter Clear], [Coverage Counter Detail]
10.5.25SW No.226
HEX 10
• Setting for allowing/prohibiting use of fax mis-sending prevention function when line is used by TEL terminal connection devices
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Do not use functions for preventing fax mis-sending. 00010000 / 10
00010000 10 Use functions to prevent fax mis-sending.
HEX 80
• Setting for allowing/prohibiting use of functions to allow administrator to change PBX function settings when an external line button is added
for direct input of an address with the PBX function enabled
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Do not use the functions. 10000000 / 80
10000000 80 Use the functions.
10.5.26SW No.227
• Setting for the display of consumable level and warning. (Control panel, Web Connection, Fiery)
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Display 10000000 / 80
(Japan/North America/
Europe)
00000000 / 00
(Others)
10000000 80 Do not display
10.5.27SW No.230
HEX 08
• Setting for the display of consumable level and warning. (PSES, MIB, Printfleet, SiteAudit)
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Display 00001000 / 08
(Japan/North America/
Europe)
00000000 / 00
(Others)
00001000 08 Do not display
HEX 40
• Setting for allowing/prohibiting use of functions for preventing a unintentional sending to a wrong destination
Bit Assignment HEX Assignment Details Default value (Bit/HEX)
00000000 00 Do not use the functions. 01000000 / 40
01000000 40 Use the functions.
10.6CCD Calibration
Front side/back side
• To set whether to use the calibration adjustment value set prior to the shipping. To display the current calibration adjustment value.
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English