Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
L TROUBLESHOOTING > 1. JAM CODE
L-1
LTROUBLESHOOTING
1. JAM CODE
1.1JAM display
Display procedure
• When the paper jam occurred, the message, the jam clear procedure, the position jam occurred (number lights up), position of the
remaining paper (number lights up), and the JAM code are displayed.
• Touch [Display Switch] to switch the screen showing the jam clear procedure or the jam occurring position.
Screen showing jam clear procedure
Screen showing the jam occurring position
NOTE
▪ JAM code is displayed on the jam warning screen only when [Service Mode] -> [System 2] -> [JAM Code Display Setting] is set to
“Display.”
▪ To change the initial display when jam occurred to the screen showing the jam occurring position, set [Paper jam release
procedure display settings] on the [Utility] -> [Utility] -> [Customize] -> [Active screen setting] to “OFF.” When [Paper jam release
procedure display settings] is set to “OFF,” the “screen showing jam clear procedure” cannot be displayed.
▪ When a tray life-up failure (trouble code) occurred, for the trouble that can be cleared by removing the tray, the following screen
is displayed showing users how to remove jammed paper and how to load paper properly. Therefore, for remaining paper jam,
the screen will disappear.
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English