Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
I SERVICE MODE > 8. CS Remote
I-28
Bit Setting item Setting Description
0 1
2
1 Line for send only Disable Enable
0 Dial Mode Pulse Tone
8.2.3SW No. 02
Default
Setting value Bit
7 6 5 4 3 2 1 0
Bit Assignment 1 1 1 1 1 1 1 1
HEX
Assignment
FF
Functions
Bit Functions Setting value Description
0 1
7 Auto call on the zero reset of the fixed parts
replacement
Disable Enable
6 Auto call of the IR shortage Disable Enable
5 Auto call on the IC Life Disable Enable
4 Call regular service date (PM) Disable Enable
3 Call drum replace date Disable Enable
2 Call parts replace date Disable Enable
1 Date specified transmission Disable Enable
0 Emergency transmission Disable Enable
8.2.4SW No. 03
Default
Setting value Bit
7 6 5 4 3 2 1 0
Bit Assignment 0 0 0 0 1 0 1 0
HEX
Assignment
0A
Functions
Bit Functions Setting value Description
0 1
7 Reservation
6
5
4
3 Auto call on the waste toner bottle full Disable Enable
2 Reservation
1 Auto call on the toner empty Disable Enable
0 Trouble Display setting When the CSRC is not
connected
When the CSRC is
connected
Select the type of message
to be displayed at the time
of automatic trouble
notification made when the
CSRC is connected, either
the message when the
CSRC is connected or that
when the CSRC is not
connected.
If "When the CSRC is not
connected" is selected
when the CSRC is
connected, an automatic
notification is made to the
center when a trouble
occurred. Only the display
on the control panel shifts
to the massage when the
CSRC is not connected.
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English