L TROUBLESHOOTING > 1. JAM CODE
L-3
d-Color MF4003/MF3303
1.3List of the JAM code
JAM code JAM type
10-01 Misfeed at manual bypass paper feed section
10-02
10-40
11-01 Misfeed at tray 1 paper feed section
11-02
11-40
12-01 Misfeed at tray 2 paper feed section (When PF-P20 or PF-P21 is installed)
12-40
13-01 Misfeed at tray 3 paper feed section (When PF-P20 or PF-P21 is installed)
13-40
20-02 Misfeed at vertical transport section (When PF-P20 or PF-P21 is installed)
20-10
20-11
20-12
20-21
20-26
30-01 Misfeed at 2nd transfer section
30-03
32-05 Misfeed at paper exit section
32-06
32-31
66-02 Misfeed at DF document feed section
66-13 Misfeed at DF document transport section
66-33
66-05 Misfeed at DF document reading section
66-07 Misfeed at DF document feed/transport/reading section
66-08 Double feed detection jam (When UK-P19 is installed)
92-01 Misfeed at duplex pre-registration section
92-02
92-03
92-04
93-03 Misfeed at duplex transport section
99-01 Controller JAM (paper size error)
99-02 Controller JAM (controller forced stop command)
99-03 Controller JAM (image processing)
99-04 Controller JAM (a job reservation in the main body is not released)
99-05 Controller JAM (main body not starting a job)
99-06 Controller JAM (print control on the main body is not completed)
99-07 Controller JAM (main body not completing a job)
1.4JAM that do not display the JAM code
JAM type JAM detection timing Ref. page
Misfeed at manual bypass
paper feed section
Paper jam of a sheet of paper left at the manual bypass paper feed section
results, if a sheet of paper is determined to exist at a position detected when
the main power switch is turned ON, a door is opened and closed, or a
misfeed or malfunction is reset.
L.1.5.1 10-01, 10-02, 10-40
Misfeed at tray 1 paper
feed section
Paper jam of a sheet of paper left at the tray 1 paper feed section results, if a
sheet of paper is determined to exist at a position detected when the main
power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
L.1.5.2 11-01, 11-02, 11-40
Misfeed at tray 2 paper
feed section (When PF-P20
or PF-P21 is installed)
Paper jam of a sheet of paper left at the tray 2 paper feed section results, if
the tray 2 transport sensor (PS6/2) is turned ON (unblocked) when the main
power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
L.1.5.3 12-01, 12-40
Paper jam of a sheet of paper left at the tray 2 paper feed section results, if a
sheet of paper is determined to exist at a position detected when the main
power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
To Next Page
Loading...
Need help?
General