d-Color MF4003/MF3303
H UTILITY MODE > 4. Utility
H-4
4. Utility
4.1Information
Key name Function/Precondition
Device Information -
Change User Password • When conducting user authentication (MFP only), it will be displayed when the authentication is
complete.
• When conducting user authentication or account track input, it will be displayed when login is
authenticated as user box administrator.
• When [Password Rules] which can be displayed by [Administrator] -> [Security] -> [Security Details] is
set to “Enable”, password using the single letter or the password same with the previous one, less than
8-digit will not be modified.
• When [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON,” entering the incorrect
password three times will cause access lock.
Synchronize User Auth. and
Account Track
• When conducting user authentication (ON (MFP), External Server Authentication, or Main + External
Server), it will be displayed only when the authentication is complete.
• It will be displayed when [Administrator] -> [User Authentication/Account Track] -> [Authentication Type] -
> [Synchronize User Authentication / Account Track] is set to “Synchronize by User.”
Function Permission Information When conducting user authentication (ON (MFP), External Server Authentication, or Main + External Server),
it will be displayed only when the authentication is complete.
Network Setting Information -
Print Setting Information Set as Default -
Font Information -
Macro List -
ICC Profile List -
PCL Setting -
PS Setting -
TIFF Setting -
Security Setting -
OOXML Print Settings -
Page Layout Settings -
Print Information -
Change E-Mail Address • When conducting user authentication (MFP only), it will be displayed when the authentication is
complete.
• It will be displayed when [Administrator] -> [Security] -> [Administrator Security Levels] is set to “Level 2.”
Change PIN Code It will be displayed when a user PIN code is set in [Administrator] -> [User Auth/Account Track] -> [User
Authentication Setting] -> [User Registration].
4.2System Settings
Key name Function/Precondition
Measurement Unit Setting -
Auto Tray Selection
Settings
-
Paper Tray Setting Auto Tray Switch ON/OFF -
No Matching Paper in Tray
Setting
-
Print Lists • It will not be displayed when [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is
mounted.
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
“Vendor 2.” (It will be displayed when the key counter is mounted.)
Auto Color Level
Adjustment
-
Power Settings Low Power Mode Setting • It will be displayed when setting other than “Restrict” is selected in [Administrator]
-> [Security] -> [Administrator Security Levels].
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management
Function Choice] is set to “Vendor 2.”
• The upper limit can be set up to 240 min. only when the switch number “157” is
specified to “02” at HEX assignment by setting [Service Mode] -> [System 2] ->
[Software Switch Setting].
Sleep Mode Setting
d-Color Remote
Access Setting
This will be displayed when an Android tablet device is connected.
AE Level Adjustment • It will be displayed when [Administrator] -> [Security] -> [Administrator Security Levels] is set to “Level 2.”
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
“Vendor 2.”
Blank Page Print Settings • It will be displayed when [Administrator] -> [Security] -> [Administrator Security Levels] is set to “Level 2.”