Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
I SERVICE MODE > 2. SETUP WIZARD
I-2
2. SETUP WIZARD
• Use of the Setup Wizard function allows those items that need to be set during the setup procedure to be extracted from the Service Mode
and set.
• This enables efficient selection and setting of Service Mode functions during the setup procedure.
NOTE
▪ The specific function may be set either via the “Service Mode” or the “Setup Wizard”. The setting made last is the valid setting.
Starting procedure
1. Call the initial screen of Service Mode.
2. Press the following keys in this order.
• Stop -> 3
3. Touch the [Prev.] key or [Next] key to select the mode.
e.g.
Exiting procedure
1. Touch [Service]. The home Service Mode screen reappears.
2. Touch [Exit].
3. Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English