Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
I SERVICE MODE > 8. CS Remote
I-26
8.1.9Product Auth. Settings
Product Authentication
• To set whether or not to enable product authentication.
NOTE
▪ When changing this setting under the condition where http is used for CS Remote Care communication, you need to perform
RAM Clear and then initial transmission again.
Setting value Default setting
Yes
No
○
WebDAV
• To set a WebDAV server for the product authentication.
Setting item Contents
URL Set the address of the WebDAV server.
account To set an account that is used to access the WebDAV server.
Password Set the password that is used to access the WebDAV server.
Port Number Set the port number that is used to access the WebDAV server.
Register Manually
• To install the certificate to be used in product authentication.
<Procedure (LMS)>
1. Touch [Register Manually] -> [LMS].
2. Touch [Start] to communicate with LMS (License Management System) and install the certificate.
3. Check that the "Install OK" message appears.
<Procedure (USB)>
NOTE
▪ In the following conditions, installation of the certificate from a USB memory is prohibited.
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] is set to [Restrict].
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] -> [Detail Setting] -> [External Memory(Service)] is set
to [Restrict].
▪ [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON”.
1. Connect the USB flash drive where the certificate obtained from LMS (License Management System) is stored to the USB port of MFP.
2. Touch [Register Manually] -> [USB].
3. Touch [Start] to install the certificate.
4. Check that the "Install OK" message appears.
8.1.10Import/Export Settings
WebDAV Setting
• To configure WebDAV server settings used to remotely export or import MFP data (address book data, authentication setting data).
Setting item Contents
URL To set the address of the WebDAV server.
Folder Name To set a folder name of the WebDAV server that is used to transfer data.
Account To set an account that is used to access the WebDAV server.
Password Set the password that is used to access the WebDAV server.
Port Number
• To set a port number that is used to access the WebDAV server.
• Enter the port number using the 10-key pad.
SSL Settings
• To configure the WebDAV server's SSL settings.
Setting value Default setting
Yes
No
○
Data Initialization
• To initialize the settings on the server.
Setting value Default setting
Yes
No
○
8.1.11Auto Initial Dial Setting
• To set whether to configure the Auto Initial Dial Setting for each CSRC communication method.
• Execute the CSRC Auto Initial Dial automatically at the first time of startup after importing [Remote Access Settings] from [Machine Import
Setting].
NOTE
▪ This function is enabled only when “Set” is selected and the following conditions are satisfied.
▪ No registrations to the CSRC server have been made.
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English