Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
I SERVICE MODE > 16. FAX
I-88
Setting item Contents Setting value Default setting
• It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the vendor 2 is mounted.
Compulsory Memory
RX
To set whether or not to use the compulsory memory reception function.
• When set to “ON”, the function permits selection of ON or OFF setting for
the compulsory memory reception function that allows a document when
received not to be printed automatically and, instead, to be printed through
manual operation.
ON
○
OFF
Dial In To set whether or not to use the modem dial-in function. ON
○
OFF
Reject Calls
(Only for Japan)
To set whether or not to use the reject calls function.
• When set to “ON”, the function displays the function that allows the user to
be rejected as a reject call number.
ON
○
OFF
Remote Rx
(Only for Japan)
To set whether or not to use the remote reception function. ON
○
OFF
Relay To set whether or not to use the relay function. ON
○ (Japan)
OFF
○ (North
America and
Europe)
Number display
(Only for Japan)
To set whether or not to use the number display function. ON
○
OFF
Scan Setting
Setting item Contents Setting value Default setting
Frame Erasure HP To set the frame erasure size during reading.
The four edges of the original are erased by the same width.
Erases the outer lines to prevent black lines from appearing. Effective in the book
transmission.
5 mm
10 mm
○
15 mm
System Function
Setting item Contents Setting value Default setting
Fax Board Watchdog To set whether or not to enable watchdog by the fax board CPU.
• ON: Reset when hung up.
• OFF: Keeps being hung up.
ON
○
OFF
Fax BOOT Rewrite on
ISW
Required when a BOOT BLOCK program is upgraded or a hardware is changed. ON
OFF
○
Error Code Display
Time
To set the communication error code display time. HOLD 20 s
10 to 250 s
(Step: 10 s)
Communication Setting
Setting item Contents Setting value Default setting
Auto Rotation Send
(LT)
To set whether or not to rotate the Letter size original automatically for
transmission.
• ON: Transmits in the A4 width.
• OFF: Transmits in the A3 width.
ON
○
OFF
Auto Rotation Send
(A4T)
To set whether or not to rotate the A4 size original automatically for transmission.
• ON: Transmits in the A4 width.
• OFF: Transmits in the A3 width.
ON
○
OFF
Error Page
Resending
To set whether to retransmit, after a communication error occurs, the document
starting with the error page or all pages.
Error Page
○
All Page
Number of Redials
(Error Page)
To set the number of redials for the error page.
Counted as a busy redial when the error page redial is busy.
0 to 7
(Step: 1)
3
16.5Fax File Format
• To initialize the following data.
• All of the scan/fax documents stored in the box are erased.
• All of the boxes produced automatically by the F code are erased.
NOTE
▪ This setting is displayed only for “Line1.”
<Procedure>
1. Press the Start key.
2. The Fax File Format is executed.
Service Manual
Y119930-3

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English