Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
H UTILITY MODE > 4. Utility
H-7
Key name Function/Precondition
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to
“Vendor 2.”
Fax • It will be displayed when fax kit is mounted.
• It will be displayed when setting other than “Restrict” is
selected in [Administrator] -> [Security] -> [Administrator
Security Levels].
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to
“Vendor 2.”
PCL Setting Select Color -
Symbol Set -
Font Settings -
Font Size -
Line/Page Default setting value differs depending on the values set in [Utility] -> [Utility] ->
[Printer Settings] -> [Basic Setting] -> [Original Direction] and [Paper Size].
CR/LF Mapping -
Thin Line -
Bar Code Font Settings It is displayed when i-Option LK-106 is enabled.
Auto Trapping -
PS Setting Select Color -
PS Error Print -
ICC Profile Settings Photo - RGB Color -
Photo - Output Profile -
Text - RGB Color -
Text - Output Profile -
Figure/Table/Graph - RGB Color -
Figure/Table/Graph - Output Profile -
Simulation Profile -
Auto Trapping -
Black Overprint -
TIFF Setting Auto Paper Select When “Auto” is selected and paper larger than the image size is not in the paper
trays, paper size error occurs.
Security Setting Verify XPS/OOXML Digital
Signature
-
OOXML Print Settings Sheet/Book Print -
Paper Size The paper size selected in [Service Mode] -> [System 1] -> [Foolscap Size Setting]
is displayed.
Paper Type -
Page Layout Settings -
4.6Store Address
NOTE
▪ In a machine where the user authentication function that uses an external server or MFP is set to ON, when you operate the
machine without performing user authentication, this menu is not displayed.
▪ It will not be displayed is [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is mounted.
Key name Function/Precondition
Address Book E-mail Address -
FTP -
SMB -
WebDAV -
User Box It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the “Vendor 2” is
mounted. (It will be displayed when the key counter is mounted.)
Fax -
IP Address Fax Setting will be available when [IP Address Fax Function Settings]
in [Administrator] -> [Network] -> [Network Fax Setting] is set to
“ON.”
Internet Fax Setting will be available when [I-Fax Function Setting] in
[Administrator] -> [Network Settings] -> [Network Fax Setting] is
enabled.
Group Destination Information -
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English