Olivetti d-Color MF4003 User Manual

d-Color MF4003/MF3303
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
SECURITY
J-29
(1)Backup Server Setting
• Set the backup server settings.
Setting item Contents Setting value Default
setting
Function Setting To set whether to use MFP as backup server (WebDAV server).
• When [ON] is selected, configure [Server settings].
ON
Disable
○
Server Settings User Name Set the User name. 64 characters maximum
-
Password Set the password. 64 characters maximum
-
2.13Customer Type
• To make each settings for customer type.
Setting item Contents Setting value Default setting
Function Setting To set whether to configure setting of customer type.
• When [Yes] is selected, configure setting of the [Business Type] and
[Employee Number].
Yes
No
○
Business Type Select the Business type. Manufacturing
-
Financial/Securities/Insurance
Business Distr/Services
IT Related Industry
Government Office
Other
Employee
Number
Select the employee number 10 or less
-
11 or more to 100 or less
101 or more to 500 or less
501 or more to 1000 or less
1001 or more to 5000 or less
5001 or more
2.14TPM Setting
• This is displayed only when the optional i-Option LK-115 v2 is enabled.
Initialize
• To initialize the memory area installed on the TPM chip.
NOTE
▪ Be sure to perform it if the i-Option LK-115 v2 is enabled.
<Procedure>
1. Touch [Initialization].
2. Press the Start key.
Status report
• To notify an error which is detected by the TPM chip self diagnosis, and output the diagnosis result, or output a report file to a USB
memory.
• The TPM chip self diagnosis is conducted when the machine starts to run.
<List Output Procedure>
1. Touch [List Output].
2. Press the Start key.
3. The status report is output.
<USB save Procedure>
1. Connect a USB memory to the USB port.
2. Touch [USB save].
3. Press the Start key.
4. The status report file is saved to the USB memory.
2.15FWCert. Settings
• If [Administrator] -> [Security] -> [Firmware Updat.Verification Set.] is enabled, perform the firmware signature.
• To be used when installing a digital signature to the MFP for signature verification.
<Procedure>
1. Obtain a digital signature.
2. Store the obtained signature in a USB memory.
3. Connect the USB memory to the USB port.
4. Touch the [Start] key.
5. Check the result, and turn the main power switch OFF and ON.
Y119930-3
Service Manual

Olivetti d-Color MF4003 Specifications

General

Brand	Olivetti
Model	d-Color MF4003
Category	Copier
Language	English