d-Color MF4003/MF3303
C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS
C-8
Smoothing Yes (at converting the resolution)
Print/Fax output settings Yes
Bypass print Possible to use as an active tray in auto selection mode.
Total page counter Yes
Monitor print No (copy at sending)
(4)Line connecting section
NCU type A-A~, line control by silicon DAA
Connecting terminal RJ11
Modem Matsushita MMD-5020
Modem sending level -10 to -15 dBm (Country spec)
DTMF sending level -10 to -15 dBm (Country spec)
Receiving sensitivity • G3 reception: up to -48 dB
• Tone reception: up to -52 dB
Dialing signal DP (10pps) and DTMF
(5)Control panel section
FAX / copy / scan / box Mode switching by panel key selection
• Possible to change modes during an operation of each mode.
• No mode return by the auto reset.
Initial screen after power-
on
Screen at power off or facsimile screen.
(depending on parameter setting))
Interruption during scanning When pressing the interrupt key while scanning documents to be transmitted, INTERRUPT LED
blinks. Copy screen appears after scanning is completed.
Interruption during recording in the FAX
mode screen
Operations by using the interrupt key are invalid.
FAX start by using the start key.
Stop by using the stop key.
• Possible to appoint to stop from the job list so as to stop during operations of the multi jobs.
FAX free memory display RDH memory
• % indication on LCD during scanning, recording and stand-by.
File memory
• Display in the JOB LIST screen
File existence indication In the following cases, the data Indicator (LED) on the control panel lights up.
• Upon reception of FAX
• When a document is saved in the bulletin board box, polling TX box, and memory RX user
box.
Display during the FAX communications No display by LCD panel icon.
Icons are displayed on the FAX waiting screen and the FAX operation screen.
Error display Displayed by LCD panel
Time display Date and time displayed.
• Present time is displayed on the sub-area.
Remote station ID display Yes
• Displayed by number display before communications
• The TSI/CSI display during communications
Other operation keys [Application] key: Moves to the FAX application function setting screen.
• Check Setting key: Valid
• */# button: Yes
• Help button: Yes
1.3PF-P20/PF-P21
Type
Items Specifications
Name 500-sheet paper feed cassette
Type Front loading type
Installation Desk type
Paper feeding system Paper separation by roller with pick-up mechanism
Document alignment Center
Paper
Items Type Size Capacity
PF-P20 Plain paper (60 to 90 g/m
2
(15
15/16 to 23 15/16 lb))
A4, B5, 8
1
/
2
x 11, 7
1
/
4
x 10
1
/
2
500 sheets
To Next Page
Loading...
Need help?
General