d-Color MF4003/MF3303
A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS
A-16
WARNING
â–ª Check the external covers and frame for
possible sharp edges, burrs, and damage.
They can be a cause of injury during use or
servicing.
â–ª When accessing a hard-to-view or narrow
spot, be careful about sharp edges and burrs
on the frame and parts.
They may injure your hands or fingers.
â–ª Do not allow any metal parts such as clips,
staples, and screws to fall into the product.
They can short internal circuits and cause
electric shock or spark bursting into flame.
â–ª Check wiring for pinched and any other
damage.
Current can leak, leading to a risk of
electric shock or fire.
â–ª Check high-voltage cables and sheaths for
any damage.
Damage may lead to product failure and/or
the risk of fire.
â–ª Do not disassemble or adjust the write unit
(PH unit) incorporating a laser.
The laser light can enter your eye, leading
to a risk of loss of eyesight.
â–ª Do not supply power with the write unit (PH
unit) shifted from the specified mounting
position.
The laser light can enter your eye, leading
to a risk of loss of eyesight.
â–ª After replacing a part to which AC voltage is
applied (e.g., optical lamp and fixing lamp),
be sure to check the installation state.
A risk of fire exists.
To Next Page
Loading...
Need help?
General