d-Color MF4003/MF3303
P THEORY OF OPERATION > 8. FK-517
P-109
• The auto forwarding setting is neglected in this mode, and the compulsory memory reception is performed.
• When SUB is received, related applications will start.
Setting change
• When there are received compulsory memory reception documents, even if the compulsory memory reception setting is set to invalid
in the utility mode, the compulsory memory reception file is not printed.
• For printing, the compulsory memory reception setting is required to be set to “ON.”
(4)Closed reception (Junk FAX)
• The closed reception function used only at the time of the reception by using the F-code SID signal.
NOTE
▪ You can not use this function with the F-code communications.
(a)Closed reception function
• Set in the [Service Mode] -> [FAX] > [System] -> [Display Setting].
(b)Closed reception function use
• Set in the [Administrator Settings] -> [Fax Settings] -> [Function Settings] -> [Closed Network RX].
• When this setting is set to “No”, the closed reception actions are not performed at reception.
(c)Closed reception password
• Four digits (0 to 9)
• Set in the [Administrator Settings] -> [Fax Settings] -> [Function Settings] -> [Closed Network RX].
To Next Page
Loading...
Need help?
General