B2.39 ERXCTLR_EL1, Selected Error Record Control Register, EL1
Register ERXCTLR_EL1 accesses the ERR<n>CTLR control register for the error record selected by
ERRSELR_EL1.SEL.
If ERRSELR_EL1.SEL==0, then ERXCTLR_EL1 accesses the ERR0CTLR register of the core error
record. See B3.3 ERR0CTLR, Error Record Control Register on page B3-294.
If ERRSELR_EL1.SEL==1, then ERXCLTR_EL1 accesses the ERR1CTLR register of the DSU error
record. See the Arm
®
DynamIQ
™
Shared Unit Technical Reference Manual.
B2 AArch64 system registers
B2.39 ERXCTLR_EL1, Selected Error Record Control Register, EL1
100798_0300_00_en Copyright © 2016–2018 Arm Limited or its affiliates. All rights
reserved.
B2-199
Non-Confidential