Swap, [3:0]
Indicates the implemented Swap instructions in the A32 instruction set:
0x0 None implemented.
Configurations
In an AArch64-only implementation, this register is UNKNOWN.
Must be interpreted with ID_ISAR1_EL1, ID_ISAR2_EL1, ID_ISAR3_EL1, ID_ISAR4_EL1,
ID_ISAR5_EL1, and ID_ISAR6_EL1. See:
• B2.66 ID_ISAR1_EL1, AArch32 Instruction Set Attribute Register 1, EL1 on page B2-235.
• B2.67 ID_ISAR2_EL1, AArch32 Instruction Set Attribute Register 2, EL1 on page B2-237.
• B2.68 ID_ISAR3_EL1, AArch32 Instruction Set Attribute Register 3, EL1 on page B2-239.
• B2.69 ID_ISAR4_EL1, AArch32 Instruction Set Attribute Register 4, EL1 on page B2-241.
• B2.70 ID_ISAR5_EL1, AArch32 Instruction Set Attribute Register 5, EL1 on page B2-243.
• B2.71 ID_ISAR6_EL1, AArch32 Instruction Set Attribute Register 6, EL1 on page B2-245.
Bit fields and details that are not provided in this description are architecturally defined. See the Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile.
B2 AArch64 system registers
B2.65 ID_ISAR0_EL1, AArch32 Instruction Set Attribute Register 0, EL1
100798_0300_00_en Copyright © 2016–2018 Arm Limited or its affiliates. All rights
reserved.
B2-234
Non-Confidential
To Next Page
Loading...
