CNTSEL, [3:0]
Selects the resource number, based on the value of CNTTYPE:
When CNTTYPE is 0, selects a single selected resource from 0-15 defined by bits[3:0].
When CNTTYPE is 1, selects a Boolean combined resource pair from 0-7 defined by bits[2:0].
Bit fields and details not provided in this description are architecturally defined. See the Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile.
The TRCCNTCTLR0 can be accessed through the external debug interface, offset 0x150.
D9 ETM registers
D9.16 TRCCNTCTLR0, Counter Control Register 0
100798_0300_00_en Copyright © 2016–2018 Arm Limited or its affiliates. All rights
reserved.
D9-516
Non-Confidential
To Next Page
