ARM Cortex-A76 Core

D2.3 DBGCLAIMSET_EL1, Debug Claim Tag Set Register, EL1
The DBGCLAIMSET_EL1 is used by software to set CLAIM bits to 1.
Bit field descriptions
The DBGCLAIMSET_EL1 is a 32-bit register.
31 8 7
0
CLAIM
RES0
Figure D2-2 DBGCLAIMSET_EL1 bit assignments
RES0, [31:8]
RES0 Reserved.
CLAIM, [7:0]
Claim set bits.
Writing a 1 to one of these bits sets the corresponding CLAIM bit to 1. This is an indirect write
to the CLAIM bits.
A single write operation can set multiple bits to 1. Writing 0 to one of these bits has no effect.
Bit fields and details not provided in this description are architecturally defined. See the Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile.
D2 AArch64 debug registers
D2.3 DBGCLAIMSET_EL1, Debug Claim Tag Set Register, EL1
100798_0300_00_en Copyright © 2016–2018 Arm Limited or its affiliates. All rights
reserved.
D2-411
Non-Confidential