Sel 411L - Page 20

xviii
SEL-411L Relay Date Code 20151029
List of Tables
Table 4.6 DNP3 Access Methods........................................................................................................C.4.8
Table 4.7 Relay Event Buffer Capacity.............................................................................................C.4.10
Table 4.8 Relay Serial Port DNP3 Protocol Settings........................................................................C.4.12
Table 4.9 Relay Ethernet Port DNP3 Protocol Settings....................................................................C.4.13
Table 4.10 Relay DNP Object List......................................................................................................C.4.16
Table 4.11 Relay DNP3 Reference Data Map ....................................................................................C.4.22
Table 4.12 Relay Object 12 Control Operations.................................................................................C.4.28
Table 4.13 Object 30, 32, FTYPE Upper Byte-Event Cause..............................................................C.4.31
Table 4.14 Object 30, 32, FTYPE Lower Byte-Affected Phase(s) .....................................................C.4.31
Table 4.15 Relay DNP3 Default Data Map.........................................................................................C.4.33
Table 4.16 Relay DNP3 Map Settings ................................................................................................C.4.38
Table 4.17 Sample Custom DNP3 Analog Input Map........................................................................C.4.41
Table 4.18 DNP3 Application Example Data Map.............................................................................C.4.42
Table 4.19 Relay Port 3 Example Settings..........................................................................................C.4.45
Table 4.20 DNP3 LAN/WAN Application Example Protocol Settings..............................................C.4.47
Table 5.1 IEC 61850 Document Set....................................................................................................C.5.2
Table 5.2 Example IEC 61850 Descriptor Components.....................................................................C.5.4
Table 5.3 Relay Logical Devices.........................................................................................................C.5.4
Table 5.4 Buffered Report Control Block Client Access....................................................................C.5.7
Table 5.5 Unbuffered Report Control Block Client Access................................................................C.5.8
Table 5.6 IEC 61850 Settings............................................................................................................C.5.12
Table 5.7 Logical Device: PRO (Protection).....................................................................................C.5.14
Table 5.8 Descriptions of FLFROM Values......................................................................................C.5.24
Table 5.9 Logical Device: MET (Metering)......................................................................................C.5.24
Table 5.10 Logical Device: CON (Remote Control)...........................................................................C.5.29
Table 5.11 Logical Device: ANN (Annunciation) ..............................................................................C.5.31
Table 5.12 SEL Nameplate Data.........................................................................................................C.5.40
Table 5.13 PICS for A-Profile Support...............................................................................................C.5.40
Table 5.14 PICS for T-Profile Support................................................................................................C.5.41
Table 5.15 MMS Service Supported Conformance ............................................................................C.5.41
Table 5.16 MMS Parameter CBB .......................................................................................................C.5.43
Table 5.17 AlternateAccessSelection Conformance Statement..........................................................C.5.44
Table 5.18 VariableAccessSpecification Conformance Statement .....................................................C.5.44
Table 5.19 VariableSpecification Conformance Statement.................................................................C.5.44
Table 5.20 Read Conformance Statement...........................................................................................C.5.44
Table 5.21 GetVariableAccessAttributes Conformance Statement...................................................................C.5.45
Table 5.22 DefineNamedVariableList Conformance Statement .........................................................C.5.45
Table 5.23 GetNamedVariableListAttributes Conformance Statement ..............................................C.5.45
Table 5.24 DeleteNamedVariableList Conformance Statement..........................................................C.5.46
Table 5.25 GOOSE Conformance.......................................................................................................C.5.46
Table 5.26 Basic Conformance Statement ..........................................................................................C.5.46
Table 5.27 ACSI Models Conformance Statement .............................................................................C.5.47
Table 5.28 ACSI Service Conformance Statement.............................................................................C.5.48
Table 6.1 PMU Settings in the Relay for C37.118 Protocol in Global Settings.................................C.6.6
Table 6.2 Time and Date Management in Global Settings .................................................................C.6.7
Table 6.3 Synchrophasor Order in Data Stream (Voltages and Currents).........................................C.6.10
Table 6.4 User-Defined Analog Values Selected by the NUMANA Setting.................................................C.6.12
Table 6.5 User-Defined Digital Status Words Selected by the NUMDSW Setting..........................C.6.13
Table 6.6 PM Trigger Reason Bits—IEEE C37.118 Assignments...................................................C.6.14
Table 6.7 Serial Port Settings for Synchrophasors............................................................................C.6.16
Table 6.8 Ethernet Port Settings for Synchrophasors........................................................................C.6.16
Table 6.9 Global Settings for Configuring the PMU (1 of 2) ...........................................................C.6.19
Table 6.10 Global Settings for Configuring the PMU (2 of 2) ...........................................................C.6.21
Table 6.11 Voltage Synchrophasor Names..........................................................................................C.6.21
Table 6.12 Current Synchrophasor Names..........................................................................................C.6.22
Table 6.13 Global Settings for Configuring the PMU ........................................................................C.6.23
Table 6.14 Synchrophasor Trigger Relay Word Bits ..........................................................................C.6.23
Table 6.15 Time-Synchronization Relay Word Bits ...........................................................................C.6.24