Sel 411L - Table 15.41 CSE TERSE Command

P.15.16
SEL-411L Relay Protection Manual Date Code 20151029
ASCII Command Reference
Description of Commands
CSE TERSE
The CSE TERSE command returns a Sequential Events Recorder report in
Compressed ASCII format without labels; the relay sends only the data
(including header data). You can apply the TERSE option with any of the
CSE commands.
If m is less than n, then records appear with the most
recent (lowest number) at the beginning of the list
and the oldest (highest number) at the end of the list.
CSE date1
c
Return the Sequential Events Recorder records in
Compressed ASCII format on date date1.
1, B, P, A, O, 2
CSE date1
date2
c
Return the Sequential Events Recorder records in
Compressed ASCII format from date date1 to date
date2.
1, B, P, A, O, 2
a
Parameter k indicates a specific number of SER records.
b
Parameters m and n indicate an SER record number.
c
Enter date1 and date2 in the same format as Global setting DATE_F.
Table 15.40 CSE Command (Sheet 2 of 2)
Command Description Access Level
Table 15.41 CSE TERSE Command
Command Description Access Level
CSE TERSE Return all Sequential Events Recorder records
without the label lines in Compressed ASCII
format.
1, B, P, A, O, 2
CSE k TERSE
a
a
Parameter k indicates a specific number of SER records.
Return the k most recent Sequential Events
Recorder records without the label lines in
Compressed ASCII format.
1, B, P, A, O, 2
CSE m n TERSE
b
b
Parameters m and n indicate an SER record number.
Return the Sequential Events Recorder records
in Compressed ASCII format from m to n
without the label lines in Compressed ASCII
format.
1, B, P, A, O, 2
If m is greater than n, then records appear with
the oldest (highest number) at the beginning of
the list and the most recent (lowest number) at
the end of the list.
If m is less than n, then records appear with the
most recent (lowest number) at the beginning of
the list and the oldest (highest number) at the
end of the list.
CSE date1
TERSE
c
c
Enter date1 and date2 in the same format as Global setting DATE_F.
Return the Sequential Events Recorder records
in Compressed ASCII format on date date1
without the label lines in Compressed ASCII
format.
1, B, P, A, O, 2
CSE date1 date2
TERSE
c
Return the Sequential Events Recorder records
in Compressed ASCII format from date date1 to
date date2 without the label lines in
Compressed ASCII format.
1, B, P, A, O, 2