P.12.31
Date Code 20151029 Protection Manual SEL-411L Relay
Bay Control
ACSELERATOR QuickSet SEL-5030 Software Bay Control Screens
Figure 12.21 Disconnect 1 Settings
Disconnect HMI Name Label. With D1 selected on the interactive
settings screen, enter a disconnect name to be displayed on the HMI
(see Figure 12.21). The number of characters is limited to a maximum string
width of 17 pixels, so keep the name short.
D01HMIN := D12
Disconnect Control Screen Name Label. This name applies to the
control screen. Enter here a descriptive name (there are 15 characters
available) to clearly identify the disconnect.
D01CTLN := BB 1
To Next Page
Loading...
