P.6.14
SEL-411L Relay Protection Manual Date Code 20151029
PC Software
ACSELERATOR QuickSet Settings
File > Save
Select Save or Save As from the File menu once settings are entered into
ACSELERATOR QuickSet. This will help ensure the settings are not lost.
File > Send
Select the Send menu item from the File menu to send the settings to a
connected device. Select which setting group you wish to send and click OK.
Edit Menu
The Edit menu includes selections that aid in the creation and viewing of
settings.
Edit > Copy
Use this menu item to copy group (set and logic) settings.
Edit > Search
Use this menu item to search for a particular setting or Relay Word bit.
Edit > Compare
Use this menu item to compare the open record with another record.
Edit > Merge
Use this menu item to merge the open record with another record.
Edit > Part Number
Use this menu item to change the part number if it was entered incorrectly
during an earlier step.
Tools Menu
The Tools menu provides access to the HMI menus, to event analysis tools
(see
ACSELERATOR QuickSet Event Analysis), and to Settings Conversion and
Options menus.
Tools > Settings > Convert
Use the Tools > Settings > Convert menu item to convert from one settings
version to another. Typically this utility is used to upgrade an existing settings
file to a newer version when installed relays have a newer setting version
number. In all settings conversions, settings which are new in the latest
settings version are populated with the default settings unless otherwise
indicated in this section.
ACSELERATOR QuickSet provides a Convert
Settings report that shows missed, changed, and invalid settings created as a
result of the conversion. Review this report to determine whether changes are
required.
To Next Page
Loading...
