H3C S3100 Series

1-1
1 IPv6 Configuration Commands
Basic IPv6 Configuration Commands
dhcp-snooping ipv6 enable
Syntax
dhcp-snooping ipv6 enable
undo dhcp-snooping ipv6 enable
View
System view
Parameters
None
Description
Use the dhcp-snooping ipv6 enable command to enable DHCPv6 snooping.
Use the undo dhcp-snooping ipv6 enable command to disable DHCPv6 snooping.
By default, DHCPv6 snooping is disabled.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Enable DHCPv6 snooping.
<Sysname> system-view
[Sysname] dhcp-snooping ipv6 enable
dhcp-snooping ipv6 information enable
Syntax
dhcp-snooping ipv6 information enable
undo dhcp-snooping ipv6 information enable
View
System view
Parameters
None
Description
Use the dhcp-snooping ipv6 information enable command to enable DHCPv6 snooping to support
DHCPv6 options.