H3C S3100 Series Command Manual

1-2
neighbor mac address : 000f-e20f-7201
neighbor port index : 98
neighbor state : two way
neighbor aged time : 24
Table 1-1 Description on the fields of the display dldp command
Field Description
dldp interval
Interval for sending DLDP advertisement packets (in
seconds)
dldp work-mode DLDP work mode (enhance or normal)
dldp authentication-mode DLDP authentication mode (none, simple, or md5)
password
Password for DLDP authentication
dldp unidirectional-shutdown
DLDP action to be performed on detecting a
unidirectional link (auto or manual)
dldp delaydown-timer Setting of the DelayDown timer
The port number of unit 1 with DLDP Number of the DLDP-enabled ports on unit 1
interface GigabitEthernet1/1/1 Port type and port number
dldp port state
DLDP state on a port (initial, inactive, active,
advertisement, probe, disable, or delaydown)
dldp link state Port state (up or down)
The neighbor number of the port Number of the neighbor ports
neighbor mac address MAC address of a neighbor port
neighbor port index Neighbor port index
neighbor state Neighbor state (unknown, one way, or two way)
neighbor aged time Neighbor aging time
dldp
Syntax
dldp { enable | disable }
View
System view/Ethernet port view
Parameters
None
Description
In system view:
Use the dldp enable command to enable DLDP on all optical ports of the switch.
Use the dldp disable command to disable DLDP on all optical ports of the switch.
In Ethernet port view:

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English