1-5
Field Description
Remaining Number Number of remaining resources
Start Port Name
End Port Name
Start port number and end port number corresponding to the entry
display ipv6-acl-template
Syntax
display ipv6-acl-template
View
Any view
Parameter
None
Description
Use the display ipv6-acl-template command to display the IPv6 ACL template configuration
information.
Only S3100-EI Series Ethernet switches support this command.
Example
# Display the IPv6 ACL template configuration information.
<Sysname> display ipv6-acl-template
Ipv6 acl template : src-ip dest-ip
display packet-filter
Syntax
display packet-filter { global | interface interface-type interface-number | port-group [ group-id ] |
unitid unit-id | vlan [ vlan-id ] }
View
Any view
Parameter
global: Displays information about global packet filtering.
interface interface-type interface-number: Displays information about packet filtering on the port
specified by interface-type and interface-number.
To Next Page
Loading...
Need help?
General