1-21
Field Description
NextSeqNumber Sequence number of the next LTM to be sent
SendLTR
Number of LTRs sent. If the MEP is inward-facing, the number of LTRs will not
be counted.
ReceiveLTM Number of LTMs received
No CCM from some remote
MEPs is received.
Failure to receive CCMs from some remote MEPs (This information is
displayed only when some CCMs are lost.)
One or more streams of error
CCMs is received. The
last-received CCM:
Display the content of the last CCM when one or more error CCMs are
received. (This information is displayed only when error CCM(s) is/are
received.)
Maintenance domain MD of the last error CCM message
Maintenance association MA of the last error CCM message
MEP ID of the MEP that sent the last error CCM message
Sequence Number Sequence number of the last error CCM
Received Time Time when the last error CCM is received
One or more streams of
cross-connect CCMs is
received. The last-received
CCM:
Cross-connect CCMs are received, and the content of the last cross-connect
CCM is displayed. (This information is displayed only when cross-connect
CCM(s) is/are received.)
Some other MEPs are
transmitting the RDI bit.
CCMs with RDI bits misplaced are received from other MEPs. (This
information is displayed only when this type of CCM(s) is/are received.)
display cfd meplist
Syntax
display cfd meplist [ service-instance instance-id ]
View
Any view
Default Level
1: Monitor level
Parameters
service-instance instance-id: Specifies a service instance by its ID, ranging from 1 to 32767.
Description
Use the display cfd meplist command to display the MEP list in a service instance.
Note that, if the service instance ID is not specified, this command displays MEP lists in all service
instances.
Examples
# Display the MEP list in service instance 5.
<Sysname> display cfd meplist service-instance 5
Service instance: 5:
MEP list: 1 to 20, 30, 50.
To Next Page
Loading...
Need help?
General