1-12
Description
Use the display qos-interface traffic-remark-vlanid command to display the VLAN marking
configuration of a port or a unit.
Related commands: traffic-remark-vlanid.
Examples
# Display the VLAN marking configuration of port Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 traffic-remark-vlanid
Ethernet1/0/1: traffic-remark-vlanid
Inbound:
Matches: Acl 2001 rule 1 running
Remark vlan: 101
Table 1-6 Description on the fields of the display qos-interface traffic-remark-vlanid command
Field Description
Ethernet1/0/1:
traffic-remark-vlanid
The VLAN marking function is enabled on the interface.
Matches Match criteria
Remark vlan
Target VLAN ID, the VLAN ID to be set for the packets matching the
specific ACL rules
display qos-interface traffic-shape
Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-shape
View
Any view
Parameter
interface-type interface-number: Specifies the type and number of a port, for which the traffic shaping
configuration information is to be displayed.
unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic shaping configuration of all
the ports is displayed.
Description
Use the display qos-interface traffic-shape command to display the traffic shaping configuration of a
port or all the ports on the device.
Related command: traffic-shape.
Only H3C S3100-EI series switches support this command.
To Next Page
Loading...
Need help?
General