H3C S3100 Series

2-4
# Display the FIB entries filtered by ACL 2001.
<Sysname> display fib acl 2001
Route Entry matched by access-list 2001
Summary Counts :1
Flag:
U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS
Destination/Mask Nexthop Flag TimeStamp Interface
211.71.75.0/24 1.1.1.2 GSU t[250763] Vlan-interface2
For details about the displayed information, see Table 2-1.
display fib |
Syntax
display fib | { begin | exclude | include } regular-expression
View
Any view
Parameters
|: Uses a regular expression to match FIB entries. For detailed information about regular expression,
refer to Configuration File Management Command.
begin: Displays a specific FIB entry and all the FIB entries following it. The specific FIB entry is the first
entry that matches the specified regular expression.
exclude: Displays the FIB entries that do not match the specified regular expression.
include: Displays the FIB entries that match the specified regular expression.
regular-expression: A case-sensitive character string.
Description
Use the display fib | command to display the FIB entries filtered by the specified regular expression.
Examples
# Display the entries starting from the first one containing the string 169.254.0.0.
<Sysname> display fib | begin 169.254.0.0
169.254.0.0/16 2.1.1.1 U t[0] Vlan-interface1
2.0.0.0/16 2.1.1.1 U t[0] Vlan-interface1
For details about the displayed information, see Table 2-1.
display fib statistics
Syntax
display fib statistics
View
Any view