1-16
display ipv6 socket
Syntax
display ipv6 socket [ socktype socket-type ] [ task-id socket-id ]
View
Any view
Parameters
socket-type: Type of a socket, in the range of 1 to 3. The value “1” represents a TCP socket, “2” a UDP
socket, and “3” a raw IP socket.
task-id: ID of a task, in the range of 1 to 100.
socket-id: ID of a socket, in the range of 0 to 3072.
Description
Use the display ipv6 socket command to display information related to a specified socket.
With no argument specified, this command displays the information about all the sockets; with only the
socket type specified, the command displays the information about sockets of the specified type; with
the socket type, task ID and socket ID specified, the command displays the information about the
specified socket.
Examples
# Display information related to a specified socket.
<Sysname> display ipv6 socket
SOCK_STREAM:
Task = VTYD(43), socketid = 1, Proto = 6,
LA = ::->23, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEADDR SO_KEEPALIVE SO_REUSEPORT SO_SETKEEPALIVE,
socket state = SS_PRIV SS_ASYNC
SOCK_DGRAM:
SOCK_RAW:
Table 1-12 Description on the fields of the display ipv6 socket command
Field Description
SOCK_STREAM
Socket type, which can be:
z SOCK_STREAM: Refers to TCP.
z SOCK_DGRAM: Refers to UDP.
z SOCK_RAW: Refers to raw IP.
Task Task name and ID of the created socket
socketid ID assigned by the kernel to the created socket
Proto Protocol ID
LA Local address and local port number
FA Remote address and remote port number
sndbuf Size of the sending buffer
rcvbuf Size of the receiving buffer
sb_cc Number of bytes sent by the sending buffer
rb_cc Number of bytes received by the receiving buffer
socket option Socket option set by the application
To Next Page
Loading...
Need help?
General