1-33
Examples
# Specify that user kk can access SFTP service.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh user kk service-type sftp
# Display SSH user information.
[Sysname] display ssh user-information
Username Authentication-type User-public-key-name Service-type
kk publickey null sftp
ssh2
Syntax
ssh2 { host-ip | host-name } [ port-num ] [ identity-key { dsa | rsa } | prefer_kex { dh_group1 |
dh_exchange_group } | prefer_ctos_cipher { des | aes128 } | prefer_stoc_cipher { des | aes128 } |
prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } | prefer_stoc_hmac { sha1 | sha1_96 | md5 |
md5_96 } ] *
View
System view
Parameters
host-ip: Server IP address.
host-name: Server name, a string of 1 to 20 characters.
port-num: Server port number. It is in the range of 0 to 65,535 and defaults to 22.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. The default is rsa.
prefer_kex: Specifies the preferred key exchange algorithm. You can select one from the following two
algorithms.
z dh_group1: Diffie-Hellman-group1-sha1 key exchange algorithm. It is the default algorithm.
z dh_exchange_group: Diffie-Hellman-group-exchange-sha1 key exchange algorithm.
prefer_ctos_cipher: Specifies the preferred client-to-server encryption algorithm, which is AES128 by
default.
prefer_stoc_cipher: Specifies the preferred server-to-client encryption algorithm, which is AES128 by
default.
z des: DES_cbc encryption algorithm.
z aes128: AES_128 encryption algorithm.
prefer_ctos_hmac: Specifies the preferred client-to-server HMAC (Hash-based message
authentication code) algorithm, which is SHA1_96 by default.
prefer_stoc_hmac: Specifies the preferred server-to-client HMAC algorithm, which is SHA1_96 by
default.
z sha1: HMAC-SHA1 algorithm.
z sha1_96: HMAC-SHA1-96 algorithm.
z md5: HMAC-MD5 algorithm.
To Next Page
Loading...
Need help?
General