1-24
CoS value Local precedence
2 0
3 1
4 2
5 2
6 3
7 3
Related command: display qos cos-local-precedence-map.
Example
# Configure the CoS-precedence-to-local-precedence mapping relationship as follows: 0 to 0, 1 to 0, 2
to 1, 3 to 1, 4 to 2, 5 to 2, 6 to 3, and 7 to 3.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] qos cos-local-precedence-map 0 0 1 1 2 2 3 3
# Display the configuration result.
[Sysname] display qos cos-local-precedence-map
cos-local-precedence-map:
cos(802.1p) : 0 1 2 3 4 5 6 7
----------------------------------------------------------------
local precedence(queue) : 0 0 1 1 2 2 3 3
qos dscp-local-precedence-map
Syntax
qos dscp-local-precedence-map dscp-list : local-precedence
undo qos dscp-local-precedence-map [dscp-list ]
View
System view
Parameter
dscp-list: List of DSCP values. It can include only one DSCP value or many DSCP values. DSCP values
are separated by space. dscp-list is connected with local-precedence by the “:” after it to indicate the
mapping relationship between them. The range of dscp-list is from 0 to 63.
local-precedence: Local precedence. This argument is in the range of 0 to 3.
Description
Use the qos dscp-local-precedence-map command to modify the
DSCP-precedence-to-local-precedence mapping table.
Use the undo qos dscp-local-precedence-map command to restore the default
DSCP-precedence-to-local-precedence mapping table.
To Next Page
Loading...
Need help?
General