H3C S3100 Series Command Manual

1-7
Table 1-2 Description on the fields of the display ipv6 fib command
Field Description
Total number of Routes Total number of routes in the FIB
Destination Destination address to which a packet is forwarded
PrefixLength Prefix length of the destination address
NextHop Next hop address when a packet is forwarded to the destination
Flag
Route flag:
“U” — Usable route
“G” — Gateway route
“H” — Host route
“B” — Blackhole route
“D” — Dynamic route
“S” — Static route
TimeStamp Generation time of an FIB entry
Interface Interface from which a packet is forwarded
display ipv6 host
Syntax
display ipv6 host
View
Any view
Parameters
None
Description
Use the display ipv6 host command to display the mapping between host name and IPv6 address.
Related commands: ipv6 host.
Examples
# Display the mapping between host name and IPv6 address.
<Sysname> display ipv6 host
Host Age Flags IPv6Address (es)
SWB 0 static 2002::1
Table 1-3 Description on the fields of the display ipv6 host command
Field Description
Host Host name
Age
Time for the entry to live, displayed as 0 in the case of static
configuration.
Flags
Flag indicating whether the entry is configured statically or acquired
dynamically
IPv6Address (es) IPv6 address corresponding to a host name

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English