2-7
Field Description
Linked with event Event index corresponding to an alarm
When startup enables: risingOrFallingAlarm
The condition under which an alarm is triggered,
which can be:
z risingOrFallingAlarm: An alarm is triggered
when the rising or falling threshold is
reached.
z risingAlarm: An alarm is triggered when the
rising threshold is reached.
z FallingAlarm: An alarm is triggered when the
falling threshold is reached.
This entry will exist: forever
Existing period. This entry can exist forever or
exist in the specified cycle
Latest value The value of the latest sample
display rmon statistics
Syntax
display rmon statistics [ interface-type interface-number | unit unit-number ]
View
Any view
Parameters
interface-type: Interface type.
interface-number: Interface number.
unit unit-number: Specifies a unit number.
Description
Use the display rmon statistics command to display the RMON statistics on a specified port or a
specified unit. If you do not specify the port or the unit, this command displays the RMON statistics on all
the ports or units.
The information displayed includes the number of:
z Collisions
z Packets with CRC errors
z Undersize/Oversize packets
z Broadcast/multicast packets
z Received bytes
z Received packets
Related commands: rmon statistics.
Examples
# Display the RMON statistics on Ethernet 1/0/1 port.
<Sysname> display rmon statistics Ethernet 1/0/1
Statistics entry 1 owned by user1-rmon is VALID.
To Next Page
Loading...
Need help?
General