H3C S3100 Series Command Manual

1-2
View
Any view
Parameters
None
Description
Use the display voice vlan oui command to display the organizationally unique identifier (OUI) list
used for identifying voice traffic.
The output of the command displays the OUI addresses, their masks, and descriptions.
By default, there are five pre-defined OUI addresses in the system. You can use the voice vlan
mac-address command to add, modify, or remove OUI addresses.
Examples
# Display the OUI list for the voice VLAN.
<Sysname> display voice vlan oui
Oui Address Mask Description
0003-6b00-0000 ffff-ff00-0000 Cisco phone
000f-e200-0000 ffff-ff00-0000 H3C Aolynk phone
00d0-1e00-0000 ffff-ff00-0000 Pingtel phone
00e0-7500-0000 ffff-ff00-0000 Polycom phone
00e0-bb00-0000 ffff-ff00-0000 3Com phone
display voice vlan status
Syntax
display voice vlan status
View
Any view
Parameters
None
Description
Use the display voice vlan status command to display voice VLAN-related information.
The output of the command displays information such as the voice VLAN security mode and voice
VLAN assignment mode (manual or automatic).
Related commands: voice vlan, voice vlan enable.
Examples
# Display the information about the voice VLAN.
<Sysname> display voice vlan status
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan security mode: Security
Voice Vlan aging time: 100 minutes
Current voice vlan enabled port mode:
PORT MODE

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English