1-17
Field Description
socket state State of the socket
SOCK_DGRAM UDP socket
SOCK_RAW Raw IP socket
display ipv6 source static binding
Syntax
display ipv6 source static binding [ vlan vlan-id | interface interface-type interface-number | unit
unit-id ]
View
Any view
Parameters
vlan-id: ID of the VLAN whose IPv6 static binding entries are to be displayed.
interface-type interface-number: Type and number of the port whose IP static binding entries are to be
displayed.
unit-id: Unit ID of a device.
Description
Use the display ipv6 source static binding command to display the IPv6 static binding entries
configured. If you specify a VLAN, all the IPv6 static binding entries for the specified VLAN will be
displayed. If you specify a port, all the IPv6 static binding entries for the specified port will be displayed.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all IPv6 static binding entries configured.
<Sysname> display ipv6 source static binding
Type IP Address MAC Address VLAN State Interface
==== ========================= =============== ==== ===== =================
S 2001::1 0001-0203-0406 ---- True Ethernet1/0/2
S 1::1 0015-e20f-0101 ---- True Ethernet1/0/3
S 1::2 0001-0001-0001 ---- True Ethernet1/0/2
--- 3 static binding item(s) found ---
display ipv6 statistics
Syntax
display ipv6 statistics
View
Any view
To Next Page
Loading...
Need help?
General