1-3
View
ISP domain view
Parameters
local: Performs local accounting. It is not used for charging purposes, but for collecting statistics and
limiting the number of local user connections.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the accounting lan-access command to configure the accounting method for LAN access users.
Use the undo accounting lan-access command to restore the default.
By default, the default accounting method that the accounting command prescribes is used for LAN
access users.
Note that the RADIUS scheme specified for the current ISP domain must have been configured.
Related commands: accounting, radius scheme.
Examples
# Configure the default ISP domain system to use the local accounting method for LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting lan-access local
# Configure ISP domain test to use RADIUS accounting scheme rd for LAN access users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access radius-scheme rd local
accounting login
Syntax
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo accounting login
View
ISP domain view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local: Performs local accounting. It is not used for charging purposes, but for collecting statistics and
limiting the number of local user connections.
To Next Page
Loading...
Need help?
General