3-2
Example
# Update the Boot ROM of the switch using the file named Switch.btm.
<Sysname> boot bootrom Switch.btm
This will update Bootrom on unit 1. Continue? [Y/N] y
Upgrading Bootrom, please wait...
Upgrade Bootrom succeeded!
display boot-loader
Syntax
display boot-loader [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
Description
Use the display boot-loader command to display the host software (.bin file) that will be adopted when
the switch starts up next time.
Example
# Display the host software that will be adopted when the switch starts up next time.
<Sysname> display boot-loader
Unit 1:
The current boot app is: Switch.bin
The main boot app is: Switch.bin
The backup boot app is: Switchback.bin
Table 3-1 Description for the fields of the display boot-loader command
Field Description
The current boot app is Boot file used for the current boot of the system
The main boot app is Main boot file to be used for the next boot of the system
The backup boot app is
Backup boot file to be used for the next boot of the system
display cpu
Syntax
display cpu [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
To Next Page
Loading...
Need help?
General